April 21, 2021

CAMO EdgeXMetal Metal Deck Clips

CAMO EdgeXMetal

Camo EdgeXMetal Deck Clips Tighten Up Your Deck Laying

Camo isn’t short on great ideas when it comes to building decks. They’ve got tools for simplifying and straightening deck boards , tools to keep from having to bend over, and innovative fastening solutions that clean up the look of your finished product. The CAMO EdgeXMetal Deck Clips fall into that last camp. In fact, the PTIA folks awarded them a Pro Tool Innovation Award for their efforts.

Camo EdgeXMetal Deck Clips

  • For any angled installation of grooved decking—composite, capped composite, PVC, and hardwood—on metal framing
  • One-pass fastening
  • Works with any 14–18ga metal framing
  • Engages and drives quickly
  • Fasten with the included Never-Miss Guide or with the CAMO Drive stand-up tool
  • Creates 3/16 in. (5mm) gap
  • Available in 90- and 450-packs

Fasten to Metal In One Pass

CAMO EdgeXMetal

CAMO aims to save you time with installs, particularly when it comes to decking on metal framing. The CAMO EdgeXMetal Deck Clips provide a one-pass solution for installing grooved boards on any 14-18ga metal, including Fortress Evolution and Trex Elevations.

The CAMO EdgeXMetal Deck Clips fit into the groove of the board so that you can install your boards at any angle on the joist. The wings secure the clip in the groove of the board so it stays put until you’re ready to fasten it down. It works with grooved composite, grooved capped composite, PVC deck boards, and grooved hardwood.

CAMO makes the clips using a 304 stainless steel gusset to reduce movement while holding the boards down. A 410 stainless steel drill point engages and drives quickly, boring the hole as you drive. It creates a 3/16″ gap, so all your work stays tight and consistent.

The CAMO EdgeXMetal Deck Clips work with the included Never-Miss Guide, or with the CAMO Drive Stand-Up tool for bend-over-less drilling.

Pricing

You can pick up buckets of the Camo EdgeXMetal in two quantities: 90-count and 450-count.


CAMO EdgeXMetal

These deck clips still seem elusive to find at most online retailers, so it’s difficult to nail down a hard and fast pricing structure. However, if they’re similarly priced to some of the other clips in Camo’s Edge Series Clips, you can expect them to retail around $45 dollars for the 90-pack and $200 for the 450-pack.

Related articles

Worx 20V Cordless Orbital Buffer and Polisher WX856L

Worx 10-inch Buffer Yields Pro Results Put a professional-looking shine on your car with the Worx 10-inch 20V Orbital Buffer (WX856L). This ergonomically-designed buffer eliminates cords for a take-anywhere approach to auto detailing. We just took a look at the Hart cordless buffers . As both brands target the DIY consumer market, we thought we’d […]

Hart 20V Inflators for High Pressure and Volume

Flat to Full in No Time at All Hart, with its ever-expanding line of 20V tools, adds two cordless inflators to its stable of helpful DIY products. The HPIF01 Inflator provides a solid option for inflating anything from balls to tires, while the HPIF50 Dual Function Digital Inflator adds a high volume option and more […]

Hart 20V Cordless Buffers in 2 Sizes

Hart Expands Cordless Lineup With Budget-Friendly 20V Buffers The Hart 20V lineup now includes two cordless buffers designed for conveniently taking your polishing work to the project, rather than the other way around. With both a 6″ model and a 10″ model available, you’ll have the tools to tackle most basic projects—large or small. Hart […]

Lansky Knife Sharpening System Standard & Deluxe

Having a dull knife can cause both cutting problems and safety issues. Those issues can be over if you start using a Lansky Knife Sharpening System. These systems give a consistently sharp edge every time you use it. Is it the best knife sharpening system out there? That would be a loaded question. With an easy to use […]

Subscribe
Notify of
guest
0 Comments
Inline Feedbacks
View all comments
0
Would love your thoughts, please comment.x
()
x